Skip to main content Skip to footer 
Why choose our fault finding and electrical repairs
You get qualified, insured electricians who work cleanly and explain things in plain English. We arrive with the right test gear, trace the true cause, and complete a safe repair with a certificate where required. No guesswork. No patch jobs that fail again a week later.
- City and Guilds inspection and testing trained
- BS 7671 compliant methods and results
- Clear quotes and realistic time windows
- Tidy workmanship with floor and surface protection
- Minor Electrical Installation Works Certificate for repairs
Fault Finding and Repairs in Leeds and Bradford explained
Electrical faults fall into patterns. The symptoms may look random. The underlying causes are not. We use a structured method to locate faults quickly and safely, then repair and verify the fix before circuits go back into service.
- Visual checks for damage or overheating
- Safe isolation and live dead testing
- Circuit mapping and identification
- Targeted tests to prove or rule out a cause
- Repair, retest, and documentation
Common symptoms we fix every day
- RCD or RCBO tripping with no obvious reason
- Single circuit down or a full board loss
- Buzzing or crackling accessories
- Burning smell near a socket, switch, or the board
- Lights flickering or dimming without a pattern
- Appliances that trip power when they start
- Outdoor power failing in wet weather
- Chargers or cookers that trip as soon as they run
Typical faults we find across West Yorkshire
- Loose neutral bar terminations that heat and carbonise
- Incorrect RCD type on EV charger circuits
- Reversed polarity on sockets or lighting points
- Damaged flexes and crushed cables behind appliances
- DIY joints under floors with no maintenance access
- Water ingress in garden sockets and floodlights
- Old rubber or cloth cable that has perished
- Undersized main bonding to gas or water
- Shared neutrals on old lighting that defeat protection
- Breakers that no longer trip within time
We document the cause and the fix, not just the symptom. You get a repair that lasts.
Our step by step diagnostic process
Safety first
We confirm the supply arrangement, isolate safely, and prove dead. Floors and worktops are protected before tools come out.
Visual and thermal checks
We look for heat marks, arcing, loose terminations, and physical damage. Where helpful we use non contact temperature checks.
Test and trace
We measure continuity, insulation resistance, polarity, loop impedance, and RCD trip times. Each test narrows the field until the fault location is clear.
Targeted access
We only open what we need. Back boxes, junctions, and accessories are inspected without unnecessary chasing.
Repair and verify
We replace or re terminate parts, then retest the circuit to prove the result. Where appropriate we issue a Minor Works Certificate.
Handover
We explain what failed, why it failed, and what to watch for in future. You receive simple guidance in writing.
Tripping RCDs and RCBOs
Frequent tripping points to leakage to earth, overload, or a faulty device. We separate circuits, perform insulation and leakage tests, and test trip times. Many charger and appliance faults only appear under load. We simulate load where safe and watch values change to pinpoint the cause.
If the device is the problem we prove it and replace like for like or with an improved option. If the circuit is the cause we repair cable or accessories and retest to a safe result.
Neutral faults and overheating
A loose neutral causes heat and intermittent trips that seem random. We check torque on bars and devices, inspect for heat damage, and correct terminations. Where the bar has been damaged we replace it or the device and record the fix. We never leave a warmed neutral to worsen over time.
Outdoor power and water ingress
External sockets, garden lights, and outbuildings suffer when seals fail or glands are missing. We inspect IP ratings, test insulation after drying if needed, and replace with proper glands and gaskets. We add drip loops and correct fixings so the repair survives the next storm.
Cooker, shower, and high load faults
High demand circuits expose weaknesses in cable sizing, breakers, and terminations. We confirm breaker ratings, check cable size and route, and verify connections at isolators and appliances. If heat marks are present we replace affected parts and record test values to show the improvement.
Lighting faults and nuisance flicker
Flicker often comes from mismatched dimmers, poor drivers, or weak connections. We confirm compatibility, change to trailing edge dimmers where appropriate, and secure terminals. For no earth at lights we fit Class II accessories or rewire that leg to restore a safe CPC where practical.
EV charger faults
Common faults include the wrong RCD type, no open PEN protection on PME supplies, and incorrect sealing. We identify device requirements, correct protection, reseal cable entries, and verify operation with real charge tests. We update labels and document the new readings.
Fault finding for landlords and agents
Rented homes need safe results and clear paperwork. We coordinate with tenants, provide updates, and document repairs with photos and certificates. If an EICR has flagged issues, we prioritise the faults that deliver the biggest safety gains first and keep you compliant.
Commercial fault finding and urgent repairs
Shops, offices, and sites cannot sit without power. We plan safe work around trading hours, isolate with lock off, and restore operation in stages so staff can keep working. We update board schedules as we go and leave a clear action list for longer term improvements.
- Three phase distribution and load balance checks
- Emergency lighting and critical circuits identified
- Neat temporary reinstatement where safe
- Final retest and written record for audits
What you receive after a repair
- A clear explanation of the fault and cause
- Test results that prove the repair is safe
- Photos of the damaged parts where helpful
- A Minor Electrical Installation Works Certificate for covered repairs
- Notes on any related risks to plan for later
We store documents securely so replacements are easy if you ever misplace them.
Pricing and scope clarity
You receive a written scope and an hourly or fixed price as appropriate. If the fault is complex we will agree stages so you can decide how far to go before authorising larger works. There are no hidden extras. If conditions change on site we speak to you first.
How to prepare for a fault finding visit
- Clear access to the consumer unit and meter
- Move heavy items that block key sockets or switches
- Unlock lofts, garages, and outbuildings if accessories are inside
- Tell us about alarms, servers, aquariums, or other sensitive loads
- Keep pets safe while doors are open
- Share any photos or notes on when the fault happens
Good preparation keeps the visit short and improves accuracy.
Safety advice until we arrive
If an accessory is hot, cracked, or smells of burning, isolate it at the board and leave it off. Do not tape over a tripping device to hold it on. Do not keep resetting a breaker that trips immediately. These are signs of danger and need proper testing.
If power is needed for medical equipment, tell us. We will plan the safest approach to keep essential loads running.
Preventing future faults
Many problems are avoidable with small changes.
- Reduce multi way adaptors and rely on fixed sockets
- Keep outdoor joints inside proper enclosures
- Replace tired chargers and flexes before they fail
- Avoid covering transformers and drivers with insulation
- Schedule an EICR at the recommended interval
Prevention saves more than it costs.
Case Studies
Leeds, Headingley
Repeat evening trips in a kitchen ring. Thermal check found a warm neutral at the board. We re terminated to the correct torque, replaced a damaged socket, and the readings returned to safe values.
Bradford, Greengates
Garden lighting failed after rain. We found missing glands and a cracked junction. IP rated joints and new glands restored insulation resistance and stopped the nuisance trips.
Pudsey
Shower tripped on start. Breaker rating was above the cable rating. We fitted the correct device, renewed a heat marked isolator, and the circuit passed on retest.
When a repair is not the right answer
Sometimes the fault reveals wider deterioration. Old rubber cable, missing CPC on lighting, or a brittle fuse box can make piecemeal fixes poor value. In those cases we explain options to rewire or upgrade in planned stages with clear prices and timelines.
A clean upgrade is often cheaper than repeated callouts.
Certificates and compliance
You receive the correct certificate for the work completed. That may be a Minor Electrical Installation Works Certificate for a repair or an Electrical Installation Certificate for larger changes. We work to BS 7671 and record values that prove safety.
Documents are issued digitally for easy sharing with insurers, buyers, and agents.
Areas we cover
We provide fault finding and repairs in Leeds and Bradford and across West Yorkshire. Key locations include Leeds, Bradford, Horsforth, Pudsey, Morley, Bingley, Shipley, Guiseley, Yeadon, Halifax, Wakefield, Dewsbury, and Cleckheaton. Nearby villages are included. Ask for availability.
Frequently asked questions
My RCD trips at night only. Can you find the cause
Yes. Timed loads such as immersion heaters, chargers, or fridges often point to a pattern. We test leakage and isolate the affected circuit to prove the cause.
Do I pay if the fault is at the supplier side
We will test and advise if the fault is outside your installation. If it is a supplier issue we explain how to report it with the right info.
Can you work around business hours
Yes. We can visit early morning or evening to keep downtime low.
Will you need to cut walls
Only where it is necessary to reach a failed joint. We aim for targeted access and a neat repair.
Will I get a certificate
Yes. You receive the correct certificate for the repair. Larger works include a full Electrical Installation Certificate.
Can you quote to prevent the fault happening again
Yes. We will advise on upgrades that remove the root cause rather than treating symptoms.
Ready to book fault finding and repairs in Leeds or Bradford
Tell us the symptoms, when they happen, and share photos of the consumer unit and affected areas if possible. We will schedule a convenient visit, find the cause, complete a safe repair, and provide clear documentation you can trust.